Air Hammer Powered O2 Sensor Removal Tool

KA-3239E
KA-3239E
KA-3239E (4)

Model

KA-3239E

Specification:

  • Remove Stuck or Seized O2 Sensor!!
  • An unique design let you use with Air Hammer. The strong vibrations from Air Hammer let you remove the stuck or seized O2 Sensor easily.
  • Swivel head makes it easier to work in confined or restricted area.
  • The socket slot / side wire cutout allows the wiring to pass through.
  • High strength durable material to sustain the shocks from air hammer.
ADD INQUIRY
Air Hammer Powered to Remove the Stuck and Seized O2 Sensor easily Swivel Head for Easy Positioning
  
 

Why you need this tool?
  • Cars usually are equipped with Two O2 Sensors.
  • One is located on the exhaust manifold for regulating fuel supply, and the other is located downstream from the catalytic converter for measuring the efficiency of the catalytic converter.
  • Due to the fact that the latter O2 Sensor is located on the exhaust pipe, it gets rusty and damaged easily as time goes by.
  • The rusts lead the O2 Sensor to stuck or seize on the exhaust pipe and make it very hard to remove the O2 Sensor.
  • So this is why you need this Air Hammer Powered Tool to remover the O2 Sensor easily!!
   
 
Instruction
  1. Insert the socket through the line from O2 sensor and fit the 22 mm internal hex to the hex on the O2 sensor.
  2. Use a 30 mm spanner to hold the external hex to stabilize the socket
  3. Connect an air hammer (not included) to the O2 sensor removal tool (Fig 1)
  4. Press the operation button on the air hammer and remove the O2 sensor

TOP