Sensor Socket Remover / Installer - 3/8” Dr. & Hex 17mm

KA-3239C KA-3239D
KA-3239C KA-3239D

Model

KA-3239C

Specification:

  • Special two parts tool designed to loosen stuck 17mm Lambda Sensor with "Air Hammer".
  • Extract the sensors: Use the 3/8" dr. air hammer to make the job easy.
  • Shank: 0.401”(10.18mm-0.15mm).
  • All parts made integrally.
ADD INQUIRY

Description

  • Fitting a new oxygen sensor is easy, but the Old one is usually Stuck and Stubborn to remove!
  • This is why you need KA-3239C & KA-3239D to step in to help!!
  • Attach KA-3239C & KA-3239D with your air Hammer to make the removal so easy.
Feature:
  • The slot gets past the wiring that might tangle your way.
  • The long 200mm rod let you reach the tucked-away/hiding sensors.
  • The air hammer vibration force makes the loosening of the stubborn sensors an easy job!!                                     
Note: If the access is very confined, it is suggested to remove the exhaust section and transfer them to work on the bench. With appropriate force, the stubborn sensor would come loose.
  • Special two parts tool designed to loosen stuck 17mm Lambda Sensor with “Air Hammer”.
  • Tighten/Install the sensors: 3/8” Dr. slot that allows to use with a torque wrench.  *Don’t use Air hammer to tighten/install the sensor *
  • Extract the sensors: Use the 3/8” dr. air hammer to make the job easy.
  • Shank: 0.401”(10.18mm-0.15mm)
  • All parts made integrally.
  
 
TOP