Torque Tester





  • Specialized torque testing equipment designed for the variety of mechanical torque wrenches.
  • Simple, accurate and cost-effective torque tester for performing calibration checks in house.
  • High speed of data reading performance (2400 run/sec.)
  • RC-232 communication port is included for the output of reading to PC.
  • There are six torque units available for application (Lb-ft, Lb-in, N-m, N-cm, kg-m, kg-cm).
  • As standard, the transducer is calibrated in a clockwise direction with a traceable calibration certificate.
  • Quality meets BS7882:1997 standard with the accuracy of +/- 0.5% of reading over the 20%~100% of full scale.
  • With three operating modes: “Track” displays the live value, “Peak” records the highest value and “First Peak” records the first peak of torque.
  • Under “First Peak” mode, the “light signal” and “Buzzer” indicate the testing completion and testing return to zero.
  • Memory function can display the 4 previous readings taken by the operator. It’s no need to stop and write after each reading.
Calibration Range (N-m) 0.75~15Nm
Accuracy ±0.5%
Units of Measurement Lb-in, lb-ft, kg-cm, N-m, N-cm
System Resolution (N-m) 0.001
Input Hex A/F (mm) 10mm
Square Drive Adaptor (inch) 1/4” , 3/8”
Operating Temperature Range +5℃~+40℃
Storage Temperature Range +0℃~+70℃
Power Cable 200mm
Power Consumption (watt) 5
Dc Power Output DC9.0V
Base Materials / Finish Aluminum / Painting
Dimensions (L*W*H) 237*150*106mm
Weight 7.7kg