Windshield Repair Kit

KA-9047A
KA-9047A

Model

KA-9047A / KA-9047B

Specification:

  • 1 x fixed support
  • 1 x plunger 8.0mm rubber mouth
  • 1 x barrel 8.0mm rubber mouth
  • 1 x Resin (1.5g)
  • 1 x razor blade
  • 1 x instruction
  • 10 x curing film
ADD INQUIRY
Step 1: clean the repair area, then place the suction cup tool(made sure the ring is centered above the chip) Step 2: insert the resin chamber into center ring until it touches the impact pint. Step 3: squeeze resin into resin chamber.
Step 4: Screw and unscrew the pressure driver into resin chamber to release any air trapped in the chamber till chip is repair. Step 5: Remove tool, and then apply curing strips. Step 6: Move windshield into direct sunlight (about 10 minutes), then scrape off excess resin.
 
TOP