3pcs Hex Offset Brake Bleeder Wrench Set
Model
KA-7828
Specification:
- Material: CR-V (SAE 6140)
- Surface treatment: Nickel Plating
- Heat Treatment: HRC 42-45
Description
|
|
Instructions:
Applications:
- Remove dust protection cap from brake bleeder valve.
- Clean the bleeder valve if the ambient area is rusty or dirty.
- Choose a suitable sized wrench and connect to the bleeder valve.
- Connect a hose to the bleeder valve while leaving the wrench connected on the valve.
- Loosen the valve and bleed air from wheel cylinder.
- Fasten the valve after air is bled from wheel cylinder.
.jpg)
Applications:
8mm | Chevrolet, Ford, Fiat, Geo, Isuzu, Mazda, Mercedes, Porsche |
9mm | BMW, Chrysler, Mercedes, Volkswagen, Volvo |
3/8” | Chrysler, Chevrolet, Dodge, Ford, Jeep, Lincoln, Mazda |
10mm | Acura, Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Eagle, Geo, GMC, Honda, Hyundai, Hummer, Infiniti, Isuzu, Jaguar, Land Rover, Lexus, Mazda, Mitsubishi, Nissan, Olds mobile, Plymouth, Pontiac, Porsche, Saab, Saturn, Subaru, Suzuki, Toyota, Volkswagen, Volvo |
11mm | Audi, BMW, Mini, Porsche, Volkswagen |
7/16” | Ford, Mazda, Mercury |