14pcs Automobile Glass & Windshield Remover Tool Kit

KA-6077K
KA-6077K

Model

KA-6077K

ADD INQUIRY

Description

  • The kit supplied with adequate tools to cut the vinyl adhesive compound and urethane around windshield and auto glass.
#1  24” Weather Strip Cutting Knife
The angle of handle provides more leverage to put more power into the cut and better side-to-side control so you can easily follow the first cut when you make your second cut. It is great rear automobile glass.
#2  12” Weather Strip Cutting Knife
It is also ideal toll for rear automobile glass. The round handle makes the knife easy to grip and provides a tremendous amount of leverage.
#3  Replaceable Blade Pinchweld Scraper (3/4” wide)
#4  Replaceable Blade Pinchweld Scraper (5/8” wide)
#5  Replaceable Blade Pinchweld Scraper (1/2” wide)
The handle is made of aluminum and unique design provides a protection function to avoid slip and injury when working. The blade is made of spring steel and hard enough to hold and edge, but soft enough so it will not dig into the pinchweld. It comes with a safety cover that keeps the blade sharp and prevents the user from cutting himself when the scraper is in the toolbox.
#6  Wide Pinchweld Scraper
It is ideal to use across the bottom, because the razor blade scraper is too wide to use across the top or up most “A” pillars. Blade is replaceable and  also comes with a safety cover.
# 7  72 feet triangle Wire
Material: Stainless
#8  2pc Wire Gripping Handles
Feed the wire (319-07) through the hole in the wedge shaft. Loop it through the hold at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
#9  Windshield Removal Tool
Cuts the vinyl adhesive compound around windshield.
It is made of aluminum and unique handle design provides a protection function to avoid slip and injury when working (It is detachable).
#10 Hexagonal Head Wrench
Use to detach the windshield removal tool (318-08).
#11  Wire Feeder Tool
Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield.
#12  Trim Pad Remover
Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simple pry up.
#13  Windshield Molding Release Tool
Use for removal of windshield molding on rubberless installation.
TOP