Description
|
|
Instruction:
1. Deflate tire if not already flat. Insert T-Handle between rim and valve stem. |
2. Turn T-Handle 1/4 turn to hook valve stem and pull out. |
3. Thread new valve stem on end of plunger rod. Apply tire/rubber lubricant to the base of the valve stem. |
4. Position insertion cone over stem hole. |
5. Push plunger rod/valve stem assembly completely through insertion cone. |
6. Pull back to seat valve stem and un-thread.
|
- For use with 453 valve stems only.
- Not to be used with 5/8” valve stems.
- Not to be used on tires TPMS-Tire pressure mounting system.
- Valve stems not included.