Rain and Light Sensor Removal Tools
Model
KA-3826
Specification:
- Three (3) Tool Size: 68 x 58mm, 63 x 42mm, 57 x 32mm.
- Removed 90% of the soft-glued rain and light sensors on the market. Found in most vehicles such as BMW, Mercedes, Mazda, Jeep and Chrysler.
* Why the Rain and Light Sensor is hard to remove??
Because the Rain and Light Sensor is always attached with hard adhesive to tightly secure it in place. But on the other hand, when you need to remove it, it ruins your patience and good mood.
How to use:
Because the Rain and Light Sensor is always attached with hard adhesive to tightly secure it in place. But on the other hand, when you need to remove it, it ruins your patience and good mood.
How to use:
- Remove the Windshield
- Use an indirect heating source to heat the outside of the windshield with a heat gun till the adhesive become soft.
- Place the removal tool over the sensor, ensure the tool is seated firmly onto glass.
- Rotate the tool with a twisting/radial motion until the adhesive release the sensor.